Oct 29, 202626 minS1
You can download a model in ten seconds and print it by lunchtime, but can you give it away, sell it at the Saturday market, or print a replacement part for something you own? This episode untangles the four kinds of...
About this Podcast:
3D Printing Zone is the podcast for people who make things with 3D printers: hobbyists, makers, designers, teachers and small businesses. Three episodes a week. Mondays round up the week's 3D printing news: new printers, materials, software, model sites and industry moves. Wednesdays and Fridays go deep on one topic: materials, slicing, design for printing, troubleshooting, multicolour, resin, and real projects, explained in plain English for a curious general audience. Australian-made, practical and honest about trade-offs. Brought to you by 3dprinting.zone , an Australian online 3D printing service. Upload an STL, 3MF, OBJ or STEP file and get a price in seconds, shipped Australia-wide. If you need custom 3D printing work done, visit www.3dprinting.zone.
Pitch Analysis
Required Pod Score for this podcast. PitchCentric checks your profile against host openness, topical fit, and audience signals before you generate a pitch.
Contact path
Public web form
Booking probability
36%
Guest openness
Selective
80/100
Required Score
Sign up to generate a grounded pitch for 3D Printing Zone.
Signup to Generate a PitchQuestions about 3D Printing Zone
What is 3D Printing Zone about?
3D Printing Zone is the podcast for people who make things with 3D printers: hobbyists, makers, designers, teachers and small businesses. Three episodes a week. Mondays round up the week's 3D printing news: new printers, materials, software, model sites and industry moves.
What has 3D Printing Zone covered recently?
Recent episodes include "Who Owns Your Print? Creative Commons, Commercial Use and Australian Law" (29 October 2026, 26 minutes), "Walls vs Infill: Why the Outline of a 3D Print Carries the Load" (27 October 2026, 26 minutes), and "This Week in 3D Printing: Bambu's Nine-Tool H3C, a US$699 Formlabs and a Scanner Rush" (25 October 2026, 25 minutes).
How often does 3D Printing Zone publish?
3D Printing Zone publishes roughly a few times a week, with episodes averaging 25 minutes.
How hard is it to get booked on 3D Printing Zone?
Booking probability for 3D Printing Zone is 36%, and the host is rated Selective on guests. 3D Printing Zone requires a Pod Score of 80 or higher. 3D Printing Zone's contact route on record: public web form.
Who should pitch 3D Printing Zone?
The strongest fits for 3D Printing Zone are Pumps, Compressors & Other Machinery. 3D Printing Zone has a leisure audience.
About the host
3D Printing Zone is a leisure podcast.
Host email not verified for this podcastSign in to unlock →
Recent episodes
Our AI reads these to draft pitches. Use them as grounding for a pitch that cites a real guest and a specific topic.
Oct 27, 202626 minS1Most people chasing a stronger 3D print reach for the infill slider. The testing says they are usually turning the wrong dial. In this episode we look at walls, also called perimeters or wall loops: the solid outlines a...
Oct 25, 202625 minS1The week of 19 to 25 October 2026 in 3D printing, for makers and small businesses, plus two stories from earlier in October we had not yet covered. Bambu Lab teased a nine-tool printer, Elegoo put a date on its first...
Oct 8, 202625 minS1In 2022 a two-year-old Shenzhen start-up founded by ex-DJI drone engineers put a printer on Kickstarter and raised about seven million US dollars in a month. Four years later Bambu Lab ships more entry-level 3D printers...
Oct 6, 202621 minS1Walk into any filament shop, online or otherwise, and plain PLA is surrounded by cousins: silk, matte, glow-in-the-dark, wood, marble, carbon fibre, sparkle, rainbow, colour-changing, and the mysterious "PLA Plus". They...
View More
Oct 4, 202616 minS1The week of 26 September to 4 October 2026 in 3D printing, for makers and small businesses. California signed a law that will one day require printers to recognise and refuse gun files, Bambu Lab launched a matte PETG...
Sep 30, 202627 minS1A dishwasher basket wheel snaps, a fridge shelf clip crumbles, the bracket on a roller blind gives way, and suddenly a perfectly good appliance is heading for the kerb over a few grams of plastic. This episode is about...
- Sep 30, 202627 minS1
<p>A dishwasher basket wheel snaps, a fridge shelf clip crumbles, the bracket on a roller blind gives way, and suddenly a perfectly good appliance is heading for the kerb over a few grams of plastic. This episode is...
Sep 30, 202624 minS1Millions of free 3D models are a click away, but where do they come from, who pays the people who design them, and what are you actually allowed to do with a file once you have downloaded it? This episode walks through...
- Sep 30, 202624 minS1
<p>Millions of free 3D models are a click away, but where do they come from, who pays the people who design them, and what are you actually allowed to do with a file once you have downloaded it? This episode walks...
Sep 30, 202630 minS1A capable 3D printer now costs less than a mid-range phone, so why would anyone pay a print service? And if services exist, why would anyone buy a printer? This episode runs the numbers properly: what an entry and...
- Sep 30, 202630 minS1
<p>A capable 3D printer now costs less than a mid-range phone, so why would anyone pay a print service? And if services exist, why would anyone buy a printer? This episode runs the numbers properly: what an entry and...
Sep 30, 202617 minS1Resin printers build objects upside down, out of a puddle of liquid, hardened one hair-thin slice at a time by violet light. The result is detail that filament printers simply cannot match: raised text a millimetre...
- Sep 30, 202617 minS1
<p>Resin printers build objects upside down, out of a puddle of liquid, hardened one hair-thin slice at a time by violet light. The result is detail that filament printers simply cannot match: raised text a millimetre...
Sep 30, 202628 minS1Multicolour 3D printing looks like magic: one machine, one nozzle, and a figurine comes off the plate already painted. This episode opens the lid on how that actually happens, from the filament changers that swap spools...
- Sep 30, 202628 minS1
<p>Multicolour 3D printing looks like magic: one machine, one nozzle, and a figurine comes off the plate already painted. This episode opens the lid on how that actually happens, from the filament changers that swap...
Sep 30, 202624 minS1<p>STL, OBJ, 3MF or STEP? The file you upload decides whether your print arrives the right size, the right colour and without a "non-manifold" error. This episode walks through what a mesh actually is, why a format...
- Sep 30, 202624 minS1
STL, OBJ, 3MF or STEP? The file you upload decides whether your print arrives the right size, the right colour and without a "non-manifold" error. This episode walks through what a mesh actually is, why a format...
Sep 30, 202627 minS1<p>Two identical tugboats, same file, same printer, same plastic. One took an hour and a half to print, the other nearly three hours, and the only setting that changed was layer height. This episode puts real numbers on...
- Sep 30, 202627 minS1
Two identical tugboats, same file, same printer, same plastic. One took an hour and a half to print, the other nearly three hours, and the only setting that changed was layer height. This episode puts real numbers on...
Best industries to pitch 3D Printing Zone for
PitchCentric classifies 3D Printing Zone under these industries. Guests from them are the closest fit, and each links to the best podcasts in that industry.
Similar Podcasts
Shows with the most semantically similar episode content. Pitch one, pitch all; producers cluster.
3D Printing Made Easy
23~330 listeners84% similar
The Slant 3D Printing Podcast
20~286 listeners83% similar
The Infill Podcast - The Place For 3D Printing
27~381 listeners83% similar
PRUSA 3D Printing Podcast
25~355 listeners82% similar
3DPOD: Insight from 3D Printing Pros
35~495 listeners82% similar
33DPQ
15~215 listeners82% similar
Podcasts like 3D Printing Zone
Is this podcast yours and you'd like to remove or correct details? Request removal or email privacy@pitchcentric.com.
Questions about the free trial? See the pricing FAQ